Mounts to front seat and allows fire extinguisher to slide with the seat.

Suits 1kg Fire Extinguisher

More room and easier to get in and out of the car

Suits Prado 150 Drivers Side Foot Well 2009-2021

Does Not fit models with Electric Seats

Made in Australia from 2mm 304 Stainless Steel

SKU KS0237
Brand KAON
Shipping Weight 0.6000kg
Shipping Width 0.170m
Shipping Height 0.040m
Shipping Length 0.600m
Shipping Cubic 0.004080000m3

Fire extinguisher mount to suit Prado 150

By: on 4 June 2021
Great idea, fitted easy enough but slotted holes could be longer as there is a few different brands of 1kg extinguisher that have different bolt pattern. To fit the extinguisher I brought I had to drill a extra hole to mount extinguisher bracket. Unless you advise what extinguisher holder suits your bracket. Cheers

Fire Extinguisher Bracket.

By: on 24 April 2021
Thanks Kaon, another great product and now the extinguisher is easy to reach if it’s needed.

Fire Extinguisher Mount for Prado 150

By: on 20 April 2021
Great, nicely made and arrived very quickly. A bit of a process to get it fitted - not as easy as the installation instructions make out. The best guide was from Anthony from Fourby4Diesel. He has a youtube video of fitting it - if i hadn't seen it I'd have been mucking around for a while before finding that rear bolt on the inside rail. Absolutely essential this is loosened off before you can get the seat to rock back enough to slide the Kaon bracket in between the seat mounting and rail. A must watch... Here's the link, or else you should be able to find it by going through Anthony's utube Fourby4Diesel site.

Great Product

By: on 12 March 2021
Just fitted the fire extinguisher bracket to my Prodo. Very high quality product. Perfect fit, easy to install. All edges are well deburred so no chance of cuts and nicks. Install location ideal for quick and easy access to extinguisher. I highly recommend this product.

Fantastic high quality product

By: on 12 May 2020
Makes the extinguisher very easier to get to in the case of a vehicle fire and saves valuable space from the Prado's cargo area. High quality construction and good instructions. I have a 2018 Prado 150 GX (the latest generation). Some notes on the installation: 1) Removing the seat trim was tricky; to detach the front of the trim you need to slide it back, its not a pop out one. 2) It was difficult to lever the seat up from the left rail enough to get the bracket under. I’m not sure what was preventing it. The right rail had plenty of room. I resorted to levering it up as much as I could with a screw driver, getting the bracket just a little under, then hammering in.

Write a product review