Complete transmission cooler kit for Prado 150 2.8L Diesel with Automatic Transmission
2mm thick Stainless steel cooler brackets with G8.8 bolts.  

Bolts to existing holes and does not require drilling or screwing into vehicle.

Davies Craig 678 Cooler kit.  Comes with hose clamps and oil cooler hose.

1.5m of 3/8" oil cooler hose.  Extra hose that is required to install.
Allow about 1-2 hours for installation.  You will also require 300mL of AT fluid to fill the cooler and lines.


SKU KS0092
Brand KAON
Shipping Weight 2.0000kg
Shipping Width 0.300m
Shipping Height 0.150m
Shipping Length 0.430m
Shipping Cubic 0.019350000m3
Unit Of Measure ea

Trans Cooler DYI

By: on 16 December 2020
It took a 4.5hr's (done at Home) but it was simple enough, just took a lot longer to get the existing clips off. had two attempts at routing the lines as the first route was a tad tight so had to do that twice

Write a product review