Share This Item:
Complete transmission cooler kit for Toyota FJ Cruiser Automatic Transmission
2mm thick Stainless steel cooler brackets with G8.8 bolts. Bolts to existing holes and does not require drilling or screwing into vehicle.
Davies Craig 678 Cooler kit. Comes with hose clamps and oil cooler hose.
1.5m of 3/8" oil cooler hose. Extra hose that is required to install.
Allow about 1-2 hours for installation.
You will also require 300mL of AT fluid to fill the cooler and lines.
Will not fit with US models that have a stud on the radiator support member.
|Unit Of Measure||ea|
Transmission Cooler Kit for FJ CruiserBy: Abdul on 8 February 2021Important accessory to have to prevent the FJ’s transmission from getting too hot. Better be safe than never.
Impressive QualityBy: Jason on 12 August 2020Very impressive kit. Install was straight forward as per provided instructions (1.5 hours). Only thing required was additional transmission oil. Wouldn't hesitate to shop with these guys again.
RecommendBy: Ian on 12 February 2020Great product easy fit, no adjustments required.