Very sturdy and stiff and does not flex like the plastic tables.
Easy to clean.
Folds and fits under the hood.
Will not melt if folded onto a hot grill. No need to wait for BBQ to cool to pack up.
Folded lips to prevent tools and plates sliding off.
Tool hanging hooks on ends of table.
Each table is 210 x 260mm
Adds heaps of work space and makes the Weber look great.
***WEBER BBQ NOT INCLUDED - SIDE TABLES ONLY***
Designed and manufactured in Brisbane, Australia
Check out my other listings for 5 in 1 Weber cleaning tools.
Loosen the large screw that fasten the plastic handles of the BBQ. Use a large Flat blade screwdriver or a T30 torx bit.
Gently spread the frames apart and align the stub shafts of the tables with the hinge holes in the frame
Tighten up screws.
History and Model of the Weber Q BBQ Range
From 2003 to 2013 each line of grills were referred to as 100, 200 and 300.
In 2014, Weber changed the line numbering from 100’s to 1000’s so the 100 became the 1000, 220 became 2200 and so on.
5 in 1 multi tool for Weber Baby Q100 BBQ
We love our Weber Q BBQ. We used to use the Weber wire brush to clean the grill but found it would not clean in the gaps very well. We could not find a bbq scraper that would fit the grill shape of the Weber so we designed our own.
This tool is great for cleaning the grill on your Weber Q BBQ. It is designed to fit perfectly between the gaps in the grill.
1 - It has a flat scraper for cleaning the top surface of the Grill
2 - A set of deep teeth is used to remove the bulk of the grime
3 - A set of smaller teeth to clean the shallow sections of the grill
4 - A single deep tooth to "floss" and thoroughly clean the gaps in the grill
5 - A bottle opener so you can crack open your favourite beverage
Also comes with a storage hook that allows you to hang the tool on the wire bracket on the bbq
To suit grills of Weber Q BBQ's with 3 digit model series (100, 200, 300). Spacing is 14mm centre to centre of grill bars.
To suit grills of Weber Q BBQ's with 4 digit model series (1000, 1200, 2000,3000 etc). Spacing is 17.5mm centre to centre of grill bars.
Designed and made in Australia from 2mm thick Laser Cut Stainless Steel.
Unit Of Measure
3 digit scraper tool
By: Peter Kolevas on
8 March 2020
I think the description is wrong. it should be the 4 digit and the 4 digit should be the 3 digit.
please review and swap them.