Can the 30L Underbody Water Tank be fitted without a towbar?

No, the tank requires OEM Genuine Toyota towbar in order to be mounted. 

 
Is the water tank compatible with both 2018–Current 3 tonne capacity towbar and the 2009–2018 2.5t towbar?

We have updated the water tank so that brackets now sit under the factory towbar nuts, with longer bolts included. This design change makes the water tank suitable for all models of Prado 150 with factory Toyota tow bar. 

 
Can the 30L Underbody Water Tank be mounted to other towbars or aftermarket rear bars? 

No, the tank is only able to be fitted to the OEM Genuine Toyota towbar. It will not work with Kaymar Rear Bar or the Hayman Reese Towbar.  

 
Can the 30L Underbody Water Tank be used with a dual rear wheel carrier? 

Some rear bars retain the genuine Toyota tow bar. If your vehicle still has the genuine towbar, you can install the Kaon water tank. 

 
Do I need a pump? Do you know if anyone has pumped it through to come out through a hose outlet inside the vehicle? 

Pumps are handy to allow easier access to water outlet at a higher position and to increase pressure for use as a shower or with a nozzle. Some customers will run hose up into the rear door. A very simple solution would be to use an inline 12v pump with standard garden hose fittings. You could use it to fill and to pump out.

What sort of pump do people install with the tank?  

You can use a small diaphragm pump or a centrifugal pump.  Centrifugal pumps are not self-priming an need to be installed at the same level at the water tank. 

 

Can the tank be filled without the use of a hose?

It is best done with a hose. It could be done without, but would be very slow and somewhat difficult to do.  

Can digital tank fill level senders and gauges be fitted to the tanks so that the water level can be checked from within the vehicle? 

It is possible, you would need to drill a hole for the sender if you want to use the level meter.