Spare Tyre Spacer 6mm to suit Toyota Prado 150 & 120, FJ Cruiser

Help push spare tyres with non-factory tyres, rims, or offsets away from the rear door.



  • Made from 6mm thick linished aluminium, so they're nicely finished and safe to handle.
  • Prevent the spare tyre from rubbing through and scuffing paint on the rear door.
  • Simple and easy to install, with no need to take the full spare tyre bracket off the rear door.



1 x 6mm Spare Tyre Spacer


Australian Designed, Made and Owned


SKU KS0348
Shipping Weight 0.5000kg
Shipping Width 0.220m
Shipping Height 0.015m
Shipping Length 0.315m
Shipping Cubic 0.001039500m3
Unit Of Measure ea

Spare Tyre Spacer 6mm to suit Toyota Prado 120, 15

By: on 17 June 2021
Having purchased new larger tyres for my 120 series Prado I required a spacer between the backdoor and the spare tyre. After fitting the spaces that I purchased from Kaon I have been very pleased. Given that other products from different suppliers were extremely expensive I found this product extremely well built and lot less expensive.

Works as advertised

By: on 15 June 2021
The only problem is that I should have ordered two of them to ensure the tyre (265/70/17 Toyo A/T II) adequately cleared the cable to the relocated reversing camera.

Perfect - just what I needed

By: on 15 May 2021
I previously had a "Kaymar Wheel on door bracket" that I used as a wheel spacer, but it didn't work well with KAON's Reversing Camera Relocation Bracket (KS0341) - the camera cable is not long enough to reach around the bracket to the repositioned camera. Also, the "Kaymar Wheel on door bracket" sticks out way too far - 30mm or so. These KAON spacers are perfect, just one would be OK for many cases, but I got two because of my bigger BFGoodrich KO2 265/70R17 tyres, to provide room for the camera cable, and for the bin bag straps.

Write a product review